Canon PIXMA iP3500 Guía De Iniciación Rápida página 12

Loading Printing Paper
Important
When printing for the first time
At purchase, the printer is set to feed from the Rear Tray.
If you are printing without changing paper source setting, load paper in the Rear Tray.
If you cut plain paper to 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, or 2.13" x 3.39" / 54.0 x
86.0 mm (credit card-size) for a trial print, it can cause paper jams.
Always load paper in portrait orientation. Loading paper in landscape orientation can cause the paper
to be jammed.
Loading Paper in the Rear Tray
1
Open the Rear Tray, then pull out the Paper
Support.
2
Open the Front Tray.
3
Extend the Output Tray Extension.
4
Adjust the position of the Paper Thickness
Lever.
Set it to the right when printing on envelopes or T-
shirt transfers, and left when printing on any other
type of paper. Refer to "Compatible Media Types"
in the User's Guide on-screen manual.
5
Load the paper in the Rear Tray with the print
side facing UP.
Do not load higher than the Load Limit Mark (A).
6
Align the paper stack against the right side of
the Rear Tray.
7
Pinch the Paper Guide and slide it against the
left side of the paper stack.
8
In the printer driver, select Rear Tray for
Paper Source.
8 Loading Printing Paper
All manuals and user guides at all-guides.com
4
3
7
(A)
1
2
5
6