Replacing An Ink Tank - Canon PIXMA iP3500 Guía De Iniciación Rápida

Replacing an Ink Tank

When ink tanks run out of ink, replace them using the following steps.
1
Open the Front Tray.
2
Make sure that the printer is on, and then open the Top Cover.
3
Push the tab of the ink tank whose lamp is
flashing fast (A) and remove it.
Do not touch the Print Head Lock Lever (B).
4
Remove the new ink tank from its packaging,
then pull the orange tape in the direction of
the arrow (A) so that the protective film does
not remain on the air hole (B). Then remove
the film completely (C).
5
Remove the orange protective cap (A) from
the bottom of the ink tank.
Carefully hold the protective cap when removing it
to prevent the ink from staining your fingers.
Discard the cap once it is removed.
Important
Do not touch the electrical contacts (B) on the ink tank.
Doing so can cause the printer to malfunction or
become unable to print.
16 Replacing an Ink Tank
All manuals and user guides at all-guides.com
(B) (A)
(C)
(B)
(A)
(A)
(B)