Publicidad
Step 15
Step
Insert SLIDE CAMS (ZZ) into the large holes in the DRAWER SIDES (D14
å
and D15). Then, fasten the DRAWER RIGHT (40CC) and DRAWER LEFT (40CD)
to the drawer. Use a GOLD 5/16" FLAT HEAD SCREW (XX) through hole #4 in
each DRAWER SLIDE.
NOTE: The screw head in the CAM must be visible through the slotted hole in
å
the SLIDE.
Finish fastening the SLIDES to the drawer. Use a GOLD 5/16" FLAT HEAD
å
SCREW (XX) through hole #2 in each SLIDE.
NOTE: You may again need to turn the cam slightly to line up hole #2 in the
å
SLIDES with the holes in the DRAWER SIDES.
3
4
Page 20
Roller end
1
2
D15
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
Screw head - turn CAM to line up holes in
ZZ
the SLIDES with holes in DRAWER SIDES
D14
3
4
XX
101730
ZZ
Roller end
1
2
www.sauder.com/services
Publicidad
