Milwaukee T-TEC 201 Instrucciones De Uso página 3

Brief description
Planetary gear for high torque at low speed in 1st gear
and high speed in 2nd gear. In percussion drills, the
planetary gear enables a high stroke rate even at low
speed.
Spindle-lok – automatic locking of the
spindle when the motor is idle.
Keyless chuck with steelsleeve for
tightening without a key.
The chuck is secured against
loosening with a locking screw when
used in counter–clockwise operation.
Bit reception – it is possible to fit drill
bits directly into the working spindle.
Gear lever for switching between 1st
and 2nd gear.
Two switch lever for switching the
machine on and off from both handle
positions. The built–in electronics
enable continuously variable
"accelerating".
Auxiliary handle can be rotated to
various positions and has a depth
gauge and built-in drill-bit storage with
room for 3 drill-bits, 3 screwdriver bits,
and a chuck key.
Reversing lever
Service cover for easy and fast
exchanging of carbon brushes.
Quik–Lok – fast exchange of power supply
cables for the use of different cable lengths
or for fast replacing of defect cables.
2
ENGLISH
All manuals and user guides at all-guides.com
Selector lever for switching between drilling
and percussion drilling.
Lock button for switch locking
Ergonomically shaped
housing with removable
bow–type handle for perfect
handling in various operating
ranges.
Attachment eye for
supporting loop
Modifications: Text, diagrams and data are correct
at the time of printing. In the interest of continuous
improvement of our products, technical specifications
are subject to alteration without prior notice.
Push–button
to remove the
bow–type
handle
T-TEC 201