Brush Information; Machine Setup; Installing Brush - Nobles SPEED SCRUB Manual Del Operaripo

OPERATION
EN

BRUSH INFORMATION

Soft Nylon Bristle Scrub Brush - -
Part No. 1037197 (standard)
Recommended for cleaning coated floors without
removing finish. Cleans without scuffing.
Polypropylene Bristle Scrub Brush --
Part No. 1037277 (option)
This general purpose polypropylene bristle scrub brush
is used for scrubbing lightly compacted soilage. This
brush works well for maintaining concrete, wood and
grouted tile floors.
Abrasive Bristle Scrub Brush - -
Part No. 1037278 (option)
Nylon fiber impregnated with abrasive grit to remove
stains and soilage. Strong action on any surface.
Performs well on buildup, grease, or tire marks.

MACHINE SETUP

INSTALLING BRUSH

FOR SAFETY: Before installing brush, turn off
machine and unplug power cord from wall outlet.
1. Raise the scrub head to the transport position by
stepping on the scrub head lift pedal (Figure 1).
FIG. 1
6
All manuals and user guides at all-guides.com
2. Remove the brush idler plate from the brush base.
3. Connect the slotted end of the brush to the drive
4. Connect the idler plate to the brush and reinstall
NOTE: If storing the machine for an extended period,
raise the scrub head to the transport position (Fig. 19).
Turn the idler plate locking knob counter--clockwise
to remove (Figure 2).
FIG. 2
hub (Figure 3).
FIG. 3
the idler plate. Make sure the idler plate hooks
engage the brush base and that the locking knob is
secure (Figure 4).
FIG. 4
Nobles Speed Scrub (03- -08)