Machine Operation; Pre--Operation; Scrubbing Floors - Nobles SPEED SCRUB Manual Del Operaripo

OPERATION
EN

MACHINE OPERATION

FOR SAFETY: Do not operate machine unless
operator manual is read and understood.
PRE- -OPERATION
1. Inspect power cord for damage.
2. Sweep and dust-mop the floor.
3. Check that the brush and squeegee blades are
installed.

SCRUBBING FLOORS

WARNING: Fire or Explosion Hazard, Do Not
Use or Pick Up Flammable Materials.
1. Pull the handle adjustment lever and adjust the
handle to a comfortable operating height (Figure
11). Release the lever to lock the position.
FIG. 11
2. Lower the scrub head to the floor by stepping on
the transport release pedal (Figure 12).
FIG. 12
8
All manuals and user guides at all-guides.com
3. Press the main power switch to the on ( I ) position
4. Press the scrubbing mode switch towards the
5. To begin scrubbing, pull the start triggers and push
FOR SAFETY: When operating machine, do not run
machine over power cord.
6. When stopping, release the triggers and continue
(Figure 13).
vacuum/brush/solution mode (Figure 14).
FIG. 13
or pull the machine in either direction (Figure 15).
FIG. 15
to move the machine to pick up all solution.
FIG. 14
Nobles Speed Scrub (03- -08)