Assembly - Casada Skyliner A300 Manual

assembly

AufbAu der Armlehne
1. locate the connector and the air hose which can be found on the side of the seat (illustration 1).
2. After feeding the connector and the air hose through the metal device, link each connection with its
counterpart on the armrest. (illustration 2+3).
3. After linking the connections to each other, feed the protruding cables back into the seat. Be careful
that the plug-in connectors and the air hose do not bend (illustration 4).
4. in the inside of the armrest there are 4 mounting hooks which are required for fixing. Please refer to
illustration 5 for the corresponding number.
5. insert the side section at a slight angle beginning with hook 1 into the top rail on the device. Push this
downwards so that Hook 2 and 3 finally fall into place. Press lightly on the height of Hook 4 against
the outside of the armrest, this should engage easily. Please do not exert a great deal of pressure. It is
better to check whether the side section has not been inserted too far back. (illustration 5+6).
3
3
Hooks on the
underside of
the armrest
1
2 Hooks
1
on the top
of the armrest
illustration 4
illustration 3
illustration 5
4
4
Hooks on
the front side
2
of the armrest
2
illustration 2
illustration 4
illustration 6
nOTe: the interconnecting
cable must be in the right place in order
to avoid jamming.
23