Troubleshooting; Storage / Maintenance; Transportation - Casada Skyliner A300 Manual

troubleshootinG

Fault
• T he noise of the engine sounds dur-
ing use.
• T he remote control does not work
properly.
• The device stops operating.

storaGe / maintenance

• T he device must only be serviced by service centres that have been commissioned by the manufacturer.
It may not be serviced by the customer themselves.
• Please do not forget to turn off the main switch on the chair after use.
• Never use the device if the sockets wobble or are loose.
• I f the device is not used for a longer period of time, the power cable should be wound up and the device
should be stored in a dry environment.
• N ever store the device at high temperatures or in proximity to open fire. Avoid prolonged exposure to
sunlight.
• Please only use a dry cloth for cleaning, do not use a diluter, benzene, or alcohol.
• T he component parts of this device have been custom designed and manufactured, they do not require
any special maintenance.
• Do not use any pointed or sharp objects to cut open the device.
• I f the device is on an uneven surface, do not roll or push it; lift it up in order to move it. Please take breaks
after each use and do not use the device a number of items without pauses.

transPortation

ensure that all cables are far from the ground.
Slide the seat on the backrest to the desired position
and carefully set it upright again.
note
Before transportation the electric power supply
must be switched off and the power cable with the
remote control cable must be disconnected.
36
Description
• T his is a normal operating noise.
• E nsure that the mains plug is properly inserted into the
socket and that the power switch is switched on. Please
check the cable of the remote control.
• I f the preset time is reached, the device automatically
switches of or if the operating time of the device is too
long, then the high-temperature cut-out turns the device
off.