dirna Bergstrom bycool COMPACT 3.0 Instrucciones De Montaje página 20

COMPACT 3.0
EN
Position the interior air distribution panel on the
12
front studs with 1 M6 nut, 1 Ø6 wide-rimmed
washer and secure with L=25 hexagon and
tighten.
Note: The hexagon must be 1 mm above
the upholstery.
12 Rubber washer
EPDM
seal
Cabin roof
Upholstery
Tighten the nut in point 10 until it comes up
13
against the top part of the interior air distribution
panel.
13
Rubber washer
EPDM
seal
M6 stud
Cabin roof
Upholstery
Position the consoles and align the unit. Once
14
aligned, remove the console.
Compact Base
M6 Nut
M6 stud
1 mm
Compact Base
Hexagon
1 mm
Ø6 Flat
washer
Interior air distribution panel
Tighten the nut
(point 10)
Interior air distribution panel
14
20
Foam
Foam
®