Prior Adjustments; Adjusting The Height Of The Shoulder Straps; Changing The Position Of The Handle - JANE MATRIX LIGHT 2 Manual Del Usuario

_ 1 PRIOR ADJUSTMENTS

Adjusting the height of the shoulder straps

For maximum protection the shoulder straps of the MATRIX LIGHT safety
seat should be adjusted to just above the baby's shoulders. Check this
height with the baby in the sitting or lying down position in the safety seat.
The straps can be adjusted using a tightener so that the seat adjusts to
your baby during the whole stage of growth.
The MATRIX LIGHT safety seat has a quick shoulder strap height ad-
justment system, you just have to press a button and slide the adjustment
mechanism along the backrest.
1a MATRIX LIGHT has 6 different heights for the shoulder straps.
There are two possible ways of changing the position:
1a.1 To change the position when lying down, pull the plastic flap
and slide the adjustment mechanism.
1a.2 To change the position when sitting down, press the button on
the backrest and slide it to the required position.
Release the button or flap and move the adjustment mechanism to the nea-
rest locking position, it should click into place. Check that it is locked by pulling
the adjustment mechanism.
20 EN

Changing the position of the handle

The carrying handle has 3 positions ( figure 1b ), each one of them has a specific
1b
function:
Position 1: Hood folded. Does not have a lock.
Position 2: Carrying position. Position for installing the seat and taking it off a JANÉ
chassis and for carrying.
Position 3: AUTO position. For travelling in the car.
To change the position, press the buttons (2) and turn the handle to the required po-
sition.
CAUTION Check and adjust the height and length of the shoulder straps
as the baby grows.