Probe Menu; Digital Input Menu; Digital Output Menu - Parker PSE 120 Manual De Uso

6.3.4 Probe menu

Touch to enter menu
Touch to go ahead
real-time probe values are displayed:
iB0 : Dew point temperature
iB2 : Evaporator temperature
iB8 : Discharge compressor temperature
iB5 : Suction compressor temperature
iB3 : Ambient temperature
iP1 : High pressure (condenser)
English

6.3.5 Digital input menu

Touch to enter menu
Local ON/OF: green when remote start contact is closed, otherwise it
is gray.
Condensate level: green when there is condensation to drain, otherwise
it is gray.
Monitoring phase: green when phase sequence is correct, otherwise
it is gray:
Compressor protection: green when compressor protection is in the
normal operating position, otherwise it is gray.
High Pressure switch: green when pressure switch protection is in the
normal operating position, otherwise it is gray.
Low Pressure switch: green when pressure switch protection is in the
normal operating position, otherwise it is gray.
PSE 120-350

6.3.6 Digital output menu

Touch to enter on menu
General alarm:green when general alarm contact is closed, otherwise
it is gray.
Compressor: green when compressor start contact is closed, otherwise
it is gray.
Condensate drain: green when condensate drain contact is closed,
otherwise it is gray.
Plan Status: green when dryer on contact is closed, otherwise it is gray.
Hot gas bypass valve: green when bypass valve contact is closed
(valve open), otherwise it is gray.
9/12