Evolution R165 CCS Li Instrucciones Originales página 9

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

www.evolutionpowertools.com
(3.4) WARNING: If any parts are missing, do not
operate your machine until the missing parts are
replaced. Failure to follow this rule could result in
serious personal injury.
(4.1) GETTING STARTED - UNPACKING
Caution: This packaging contains sharp objects. Take
care when unpacking. Remove the machine, together
with the accessories supplied from the packaging.
Check carefully to ensure that the machine is in good
condition and account for all the accessories listed in
this manual. Also make sure that all the accessories
are complete.
If any parts are found to be missing, the machine and
its accessories should be returned together in their
original packaging to the retailer.
Do not throw the packaging away; keep it safe
throughout the warranty period. Dispose of the
packaging in an environmentally responsible manner.
Recycle if possible.
Do not let children play with empty plastic bags due
to the risk of suffocation.
(4.2) ITEMS SUPPLIED
066-0001,
066-0004
Instruction
Manual
Multi-Material
TCT Blade
Hex Key (Blade
Change)
Parallel Edge
Guide
Dust Port
Adapter
Dust Hose
Adapter
2Ah Battery
4Ah Battery
5Ah Battery
8Ah Battery
Single dock
charger
Double dock
charger
(4.3) Evolution Instruction Manuals
Evolution Power Tools provides each product with
an Instruction Manual.
Each dedicated manual is carefully constructed
and designed to provide easily accessible and
useful information regarding the safe use, care
and maintenance of the product. Referencing the
information contained within the manual will allow
the operator to fully and safely exploit the potential
of the machine.
Evolutions policy of continual product
development may mean that, very occasionally,
the contents of a manual may not completely
reflect the latest improvements or upgrades that
have been incorporated into a particular product.
Upgrades/improvements to the specification of
a product could come about as a consequence
of technological advances or changes to the
legislative framework of the receiving country, etc.
If you are at all unsure about any aspect of the
use, care or maintenance of an Evolution product,
contact the relevant Evolution helpline where up to
date information and extra advice will be available.
ADDITIONAL ACCESSORIES
In addition to the standard items supplied with
066-0001A,
this machine the following accessories are also
066-0001B,
available from the Evolution online shop at
066-0001C,
www.evolutionpowertools.com or from your local
066-0004A
retailer.
Description
Multi-material TCT
Blade
RECOMMENDED BATTERIES/CHARGERS
Description
2Ah Battery
4Ah Battery
5Ah Battery
8Ah Battery
R18RCH-Li1-
Single dock
charger
R18RCH-Li2 -
Double dock
charger
If you intend to store a battery for a period without
use then store battery at room temperature (0°C
to 20°C) When storing for very long periods, boost
charge the battery once per year to prevent over
discharge; the Ambient temperature range for
tool and battery use: 0°C to 40°C; The charging
temperature: 5°C to 40°C
9
Part No
R165TCT-18CS
Part No
R18BAT-Li2,
EBAT18-Li-2
R20BAT-Li2
R18BAT-Li4,
EBAT18-Li-4,
R20BAT-Li4
EHPB18-Li-4
R18BAT-Li5,
EBAT18-Li-5
R20BAT-Li5
R18BAT-Li8,
EHPB18-Li-8
R20BAT-Li8
R18RCH-Li1,
EFC18-Li
R20RCH-Li1
R18RCH-Li2,
EMC18-Li
R20RCH-Li2
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido