Makita UC002G Manual De Instrucciones página 8

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Overall length
(without guide bar and battery)
Rated voltage
Net weight
Standard guide bar length
Recommended guide bar
length
Applicable saw chain type
(refer to the table below)
Standard sprocket
Chain speed
Chain oil tank volume
Protection degree
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
*1: Weight, without the saw chain, guide bar, guide bar cover, oil and battery cartridge(s).
*2: The lightest and heaviest combination of weight, according to EPTA-Procedure 01/2014. The weight may differ
depending on the attachment(s), including the battery cartridge(s).
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
NOTE: We recommend using the recommended batteries to fully obtain the performance of this tool.
Saw chain, guide bar, and sprocket combination
Saw chain type
Number of drive links
Guide bar
Sprocket
*1
*2
with 90PX
with 91PX
with 25AP
Number of teeth
Pitch
Guide bar length
Cutting length
Pitch
Gauge
Type
Number of teeth
Pitch
UC002G UC003G
D.C. 36 V - 40 V max
3.8 - 4.5 kg 3.9 - 4.6 kg
250 mm 300 mm
250 - 350 mm
250 - 350 mm
90PX
91PX
3/8"
BL4020 / BL4025* / BL4040* / BL4050F
* : Recommended battery
DC40RA / DC40RB / DC40RC
40
250 mm
225 mm
8 ENGLISH
UC004G
266 mm
2.6 kg
4.0 - 4.7 kg
350 mm
-
6
0 - 24.8 m/s
(0 - 1,490 m/min)
3
200 cm
IPX4
90PX
46
300 mm
281 mm
3/8"
1.1 mm
Sprocket nose bar
6
3/8"
UC006G
3.9 - 4.5 kg
250 mm
-
-
250 mm
25AP
9
1/4"
52
350 mm
337 mm