Commissioning; First Steps - BRAND Transferpette electronic Instrucciones De Operación

4 Commissioning

4 Commissioning

4.1 First Steps

1. Insert rechargeable battery
a.
b.
c.
2. Activate instrument
1 x
Rechargeable battery
capacity indicator
Arrow icon 'Aspirate'
50
Operating manual
a.
b.
c.
The Transferpette® electronic automatically requests a refer-
ence run immediately after the battery is inserted. After
pressing the pipetting key, the reference run is carried out,
and the instrument is ready for pipetting.
The display shows the factory-set default pipetting mode
Pipetting
(PIP) and the respective nominal volume.
The aspiration and dispensing speed are set to maximum at
the factory.
The simple volume and speed setting is described on the fol-
lowing pages.
Volume display
Open the cover of the battery compartment.
Insert the rechargeable battery into the compartment.
Make sure that the plug of the rechargeable battery is
firmly inserted into the socket in the instrument.
Replace the cover of the battery compartment and
close it.
Transferpette® electronic 997209