Important User Information - Allen-Bradley SLC 500 1747-L20 Instrucciones De Instalación

All manuals and user guides at all-guides.com
4 SLC 500™ Fixed Hardware Style Controllers

Important User Information

Because of the variety of uses for the products described in this publication, those
responsible for the application and use of this control equipment must satisfy
themselves that all necessary steps have been taken to assure that each application
and use meets all performance and safety requirements, including any applicable
laws, regulations, codes, and standards.
The illustrations, charts, sample programs, and layout examples shown in this guide
are intended solely for purposes of example. Since there are many variables and
requirements associated with any particular installation, Allen-Bradley does not
assume responsibility or liability (to include intellectual property liability) for actual
use based upon the examples shown in this publication.
Allen-Bradley publication SGI-1.1, Safety Guidelines for the Application, Installation,
and Maintenance of Solid-State Control (available from your local Allen-Bradley
office), describes some important differences between solid-state equipment and
electromechanical devices that should be taken into consideration when applying
products such as those described in this publication.
Reproduction of the contents of this publication, in whole or in part, without
written permission of the Allen-Bradley Company is prohibited.
Throughout these installation instructions we use notes to make you aware of safety
considerations:
ATTENTION
Attention statements help you to:
• identify a hazard
• avoid the hazard
• recognize the consequences
IMPORTANT
Publication 1747-IN008B-MU-P
Identifies information about practices or circumstances that can
lead to personal injury or death, property damage, or economic
loss.
Identifies information that is critical for successful application
and understanding of the product.