Using Latch Guides - Cybex Platinum ATON Q Manual Del Propietário

CENTER SEATING POSITIONS
Check your Vehicle Owner's Manual to see if you can use
the Center Seating Position to install a Child Restraint using
LATCH anchors.
DO NOT USE the INNER lower LATCH anchors from
the OUTER seating positions when installing this child
restraint in the center seating position unless the
vehicle manufacturer specifically allows it.
Make sure there is enough height to use the Load Leg in the Center
Seating Position as many vehicles have a hump in the floor that
could cause the Base to be pushed up above the vehicle seat. See
page 23.
If using LATCH in the center seating position, ALWAYS check the vehicle
Owner's Manual for correct use of lower LATCH anchors.

USING LATCH GUIDES

1. Locate the lower LATCH anchors or the
symbols indicating their location.
2. If the lower LATCH anchors are hidden behind the
crease between the seat back and seat cushion,
install the supplied LATCH Guides to the lower LATCH
anchors for easier installation of the Aton Q Base.
3. To install, connect the two LATCH Guides to the two
lower LATCH anchors by sliding the LATCH Guides into
the crease and under the lower LATCH anchors.
21
All manuals and user guides at all-guides.com
USING LATCH
?