Unpacking; Disposal Of Packaging Materials; Handling And Operation; Reset Function/Safety Cut-Out - Silvercrest SSJ 150 A1 Instrucciones De Uso

Unpacking

♦ Remove all parts of the appliance and the operating instructions from the box.
♦ Remove all packaging material.

Disposal of packaging materials

The packaging protects the appliance from damage during transport.
The packaging materials have been selected for their environmental friendliness
and ease of disposal, and are therefore recyclable.
Returning the packaging into the material cycle conserves raw materials and
reduces the amount of waste generated. Dispose of packaging materials that
are no longer needed in accordance with applicable local regulations.
NOTE
► If possible, keep the appliance's original packaging during the warranty
period so that the appliance can be packed properly for return shipment in
the event of a warranty claim.

Handling and operation

This section provides you with important information on handling and using the
appliance.
WARNING! RISK OF INJURY!
► Always unplug the appliance before fitting or removing accessories.

Reset function/Safety cut-out

This appliance is equipped with a safety cut-out to protect the motor.
If fruit pieces get stuck and the appliance turns itself off, the safety cut-out has
tripped. The appliance switches itself off before the motor can be damaged due
to overheating. The appliance cannot be switched back on until you reset the
safety cut-out.
Proceed as follows to be able to use the appliance again:
–
Set the on/off switch
power cable
for 10–15 minutes.
–
Turn the housing lid
the marking on the sieve tray holder
–
Remove the housing lid
–
Remove the fruit or vegetable pieces causing the blockage.
■ 38 │ GB │ IE
to the "O" position and pull the plug on the
out of the socket. Allow the appliance to cool down
anticlockwise until the
.
marking points towards
and clicks firmly into place.
SSJ 150 A1