Optional Kit Parts; Four Wheel Kit Installation - Honda EG4000CX Manual De Explicaciones

OPTIONAL KIT PARTS

Four Wheel Kit Installation

1.Install the lock plate and four wheels on the wheel shaft using the
plain washers and split pins.
Install the front wheel shaft on the front side nearest the engine.
2.Install the wheel shaft assembly to the generator using eight 8×16
mm hex bolts.
TORQUE: 24–29 N∙m (2.4–3.0 kgf∙m)
8×16 mm HEX BOLT (8)
8 mm
FLANGE NUT (8)
FRONT WHEEL SHAFT
INSTALLATION OF KIT PARTS
LOCK PLATE
LONGER
REAR WHEEL SHAFT
WHEEL (4)
20 mm PLAIN WASHER (5)
4×28 mm SPLIT PIN (4)
GENERATOR
SIDE
43