Metz MECABLITZ 44 AF-1 digital Manual De Instrucciones página 87

• Programmed flash mode
• Wireless P-TTL remote flash operation as
slave flash unit
• Preflash function for reducing the red-
eye effect
• Automatic flash / triggering control
• Wake-up function for the flash unit
• Firmware update via USB connector
44AF-1 Samsung
• Flash-ready indication in camera
viewfinder
• Automatic flash sync speed control
• A-TTL flash mode
• Automatic fill-in flash control
• Manual flash exposure correction
for A-TTL
• 1st or 2nd curtain synchronisation
(REAR)
• Automatic motor zoom control
• Automatic AF measuring beam control
• Programmed auto flash mode
(AUTO FLASH)
• Wake-up function for the flash unit
• Firmware update via USB connector
44AF-1 Sony:
• Flash-ready indication in camera
viewfinder
• Automatic flash sync speed control
• Preflash TTL and ADI metering
• Automatic fill-in flash control
• Manual flash exposure correction
• 1st or 2nd curtain synchronisation
(REAR)
(set on the camera, if possible)
• Automatic motor zoom control
• Automatic AF measuring beam control
• Wireless remote flash mode
• Triggering control (AUTO FLASH)
• Wake-up function for the flash unit
• Firmware updates
It is impossible to describe all camera
types and their individual dedicated flash
functions within the scope of these
instructions. Therefore, please refer to the
flash mode description in your camera's
operating instructions to find out which
functions are supported and which ones
have to be set manually on the camera.
Using lenses not equipped with a CPU
(i.e., lenses without auto focus mode),
results in certain functional limitations.
+
k
87