Control Panel - Bourgeat Nomad 887030 Instrucciones De Uso

y Electrical connection :
Trolleys must be connected to an electric line with :
- Minimum section of 2.5 mm2 for the 2*4 reheating model.
- Minimum section of 5*1.5 mm2 for the 2*8 reheating models
The electrical connection must be made dependent on a highly-sensitive differential device that is protected against overcurrent.

CONTROL PANEL

y Turning it on : connect the plug to the mains dependent on a highly-sensitive differential device that is protected against overcurrent.
All of the trolley's functions can be accessed directly via the touch screen.
2x4 model :
Management mode button
Cold production indicator
Upper chamber consultation button
2x8 model :
Management mode button
Cold production indicator
Left chamber temperature
Right chamber consultation button
USE
These devices are designed to maintain the temperature cold in the cold chamber for starters, desserts and drinks, and maintain the tem-
perature cold, then a retherm followed by maintaining hot in the retherm chamber for hot foods.
When turned on, maintaining cold is automatically turned on in order to ensure a temperature drop in the chambers.
These devices can be used for cold links or hot links.
y Use as a cold link
The food to be loaded must be at a temperature between 0 and 3°C.
Loading is done, preferably, in refrigerated premises and in a refrigerated cart
The cart has to be turned on at least 1 h before it is loaded in order to refrigerate the chambers.
Two types of operation are possible :
Manual : With no retherm programme activated: with this type of operation, starting retherm is done manually in the following way :
Press the chamber to be controlled in the control button :
22
Keep your finger on
this button for 2
seconds
Heat lamp/plate control button
Time
Upper chamber temperature
Lower chamber temperature
Cold production indicator
Heat lamp/plate control button
Time
Upcoming programme indicator (breakfast)
Right chamber temperature
Chamber control button