Operating The Viewer Function From The Projector (Playback) - NEC HT1100 Manual Del Usuario

Operating the Viewer Function from the
Projector (playback)
This section describes the operation for showing slides created using
the Viewer function with the projector. It is also possible to make slides
directly from the images projected with the projector.
Projecting slides (Viewer)
Preparation: Use the Capture feature to store JPEG or BMP files in a
PC card inserted into the projector's slot. Or store JPEG or BMP files in
a PC card inserted into your PC's slot.
1. Insert a PC card into the PC card slot of the projector.
2. Press the VIEWER button on the remote control or select the "Viewer"
from the source list.
An image stored in the PC card will be displayed.
3. Press the MENU button to display the Viewer menu.
4. Select "Play" and then press the ENTER button to display the first
slide or to start playing slides automatically.
Checking "Start", means that selecting Viewer input displays a list of the
folders in the PC card and if "Auto Play" is checked the projector auto-
matically starts to play slides at the first slide of the folder you have
selected.
The viewer menu will appear when you press the MENU button on the
remote control or the projector cabinet.
The viewer menu includes the following commands:
Play ............. Plays back automatically or manually depending on the
setting of Option. This allows you to move on to the next
slide when "Manual Play" is selected in the "Play Mode".
Stop ............. This allows you to stop Auto Play while you are playing
back and to resume playing from the selected slide or folder
when "Auto Play" is selected in the "Play Mode".
Thumbnails . Displays a list of thumbnails of JPEG or BMP files stored
in the PC card inserted into the projector.
Delete .......... Deletes a captured slide(s) or all the captured slides in
the Capture - specific folder.
Logo ............ Replace the default background logo with another logo in
JPEG or BMP format.
Option ......... Displays the viewer setting options.
All manuals and user guides at all-guides.com
Setting Option for Viewer
Play Mode:
Auto ........................... Plays back slides automatically when the Viewer
Manual ...................... Views a slide manually when the Viewer source
Interval ...................... Specifies interval time between 5 and 300 sec-
Start .......................... Specifies start screen when the Viewer source
Show Thumbnails ...... Selecting the Viewer source will display a list of
NOTE: If no memory card is inserted in the PC CARD slot, there is no signal, and
a black, blue or logo background is displayed, depending on the setting.
Playback is stopped when
in Auto Play mode.
E-39
source is selected.
is selected.
onds.
is selected.
Slot 1
3 Files
_CAP_
_RESTORE
RECYCLED
0000.jpg
1/3 0000.jpg 60KB
select : ENTER
thumbnails of JPEG or BMP files stored in the
PC card when "On" is selected.
Slot 1
3 Files
_CAP_
_RESTORE
RECYCLED
0000.jpg
1/3 0000.jpg 60KB
select : ENTER
button on the cabinet or remote control is pressed
0001.bmp 0002.jpg
0001.jpg 0002.jpg