TRAPP Master 1000 Manual De Instrucciones página 29

www.trapp.com.br
How to Refill the Spool - Master 1000
To refill the spool is a fast and simple operation. Use
only nylon thread in the gauge of 2.4 mm. Nylon
lines in a diameter other than the specified may
damage the motor and the spool advancing system
and consequent loss of warranty. Length of the nylon
thread: 2 m.
1.
Release the spool fixation butterfly.
2. Remove the spool.
3.
Place the nylon thread in the spool cavity, rolling
clockwise.
Image merely illustrative
4.
When finishing rolling the nylon thread, fix
the thread in the fixation groove in order to avoid
unrolling.
5.
Assemble again the spool set passing the nylon
thread tips through the side bores.
6.
Using the butterfly, fix once again the spool set
in the equipment.
Image merely illustrative
29