Publicidad
GB
SETUP
1 Go into SETUP mode by pressing Stand-BY and
Feed on at the same time when the printer switches
on.
2 The printer should print all list of the
parameters :
• Printer emulation: ESC/POS™.
• Baud Rate: 57600,38400, 19200, 9600 , 4800,
2400, 1200.
• Data length: 7, 8 bits/char.
D
• Parity: None , even or odd.
D
• Handshaking: XON/XOFF or Hardware .
• Autofeed: CR disabled or CR enabled.
• Panel keys: Enabled or disabled.
• Print mode: Normal or reverse.
D
• Chars/inch: A=32 B=42 col , A=42 B=56 col .
• Speed/Quality: Normal , Draft or High
Quality.
• Current consumption: Normal , Low or High.
• Peel of Device: Present , Not present
• Print density: Normal , Dark, Very Dark, Very
Light, Light
Notes: The parameters indicates with a symbol are
the default values.
15
D
D
D
D
D
D
D
D
D
D
Publicidad
