Bombard SUNRIDER 500 Manual Del Propietário página 49

BUOYANCY MECHANISM - INFLATING THE BOAT
INFLATING THE BUOYANCY MECHANISM
• Place the adapter corresponding to the diameter of the semi-built in valve at the inflator pipe
nozzle.
Inflate the buoyancy mechanism, balancing the pressure between the different compartments until
the partitions (a) are no longer visible (pressure = 240 mb)
NEVER PRESSURISE A
COMPARTMENT WHEN
THE OTHERS ARE
COMPLETELY
DEFLATED
Inflating is complete: Screw on the inflating valve caps
WARNING
50 %
1
100 %
2
A SLIGHT AIR LEAK IS NORMAL BEFORE THE VALVE
CAP IS SCREWED ON
ALWAYS SCREW IN THE PLUGS, AS THEY ENSURE
FINAL TIGHTNESS.
Page 11 of 35
a
50 % 50 %
100 %
100 %
E
N
G
L
I
S
H