Beem ESPRESSO-SELECT Manual De Instrucciones página 26

Ocultar thumbs Ver también para ESPRESSO-SELECT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN
Allow the portafi lter to cool down before it is emptied.
Never pour water into the water tank when the device is switched on or during the
brewing process. Allow the device to cool down before fi lling it again.
Do not move the device during the brewing process.
In the interest of your own safety, inspect the device and the connecting cable for damage
each time before you use it. Use the device only if it is in working order.
Make sure that the connecting cable does not present a trip hazard. The connecting cable
should not hang down from the surface on which the device is placed in order to prevent
the device from being pulled down.
WARNING – Danger of Fire
Do not use the device in rooms containing easily ignitable dust or poisonous and explosive
fumes.
Do not connect the device along with other consumers (with a high wattage) to a multiple
socket in order to prevent overloading and a possible short circuit (fi re).
Do not operate the device in the vicinity of combustible materials. Do not place any com-
bustible materials (e. g. cardboard, paper, wood or plastic) in or on the device.
Do not cover the device during operation.
NOTICE – Risk of Damage to Material and Property
The device should only be used if it has been correctly assembled! Before each use, check
whether the portafi lter is inserted correctly and whether the water tank is fi lled correctly!
Switch off the device and pull the mains plug out of the plug socket if an error occurs during
operation, when there is a power cut or before a thunderstorm.
When you pull it out of the plug socket, always pull on the mains plug and never the mains
cable!
Never pull or carry the device by the connecting cable.
Protect the device from other heat sources, naked fl ames, sub-zero temperatures, persistent
moisture, wet conditions and impacts.
Use only original accessories from the manufacturer in order to guarantee that there is no
interference that may prevent the device from working and to avoid possible damage.
05025_Inlay_DE-EN-FR-ES-IT_A5_V3.indb 26
05025_Inlay_DE-EN-FR-ES-IT_A5_V3.indb 26
26
29.01.2021 14:40:37
29.01.2021 14:40:37

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

05025

Tabla de contenido