Routine Maintenance - Polaris ATLAS Manual Del Propietário

Routine Maintenance

To ensure correct operation and extend the life of your cleaner:
1. Empty the Pump Basket Regularly
For the cleaner to operate at highest efficiency, empty the pump basket regularly. The more debris in the
pool, the more often the pump basket should be cleared.
NOTE: Polaris offers an in-line leaf canister which maintains flow while catching debris, and reduces
debris from reaching the pump filter basket.
2. Remove Debris from Engine
To avoid serious injury, make sure that the cleaner is disconnected from the hose and the suction
pump used for the cleaner is turned off prior to starting this operation.
In case of debris that impedes cleaner function:
1. Push the latch release button on the top of the cleaner
(Figure 12) to open the cover.
2. Open the lid and inspect the engine. Remove any debris.
3. If necessary, pull the engine by the engine blades and
remove it. No tools required (Figure 13).
4. Reinstall the engine. Make sure the engine is positioned
with the large wheel on the right side (marked A) when
reinstalling.
5. Close engine cover and ensure the latch clicks in place.
Figure 13. Remove Debris From the Engine
WARNING
Figure 12. Latch Release Button
9