Linksys USB200M Guia Del Usuario página 16

3. Select Search for the best driver in these locations. Only select Include
this location in the search:, and enter D:\winxp in the field provided. Then
click the Next button.
4. Windows will notify you that the driver has not passed Windows Logo
testing. This is normal, and it has been verified that the Adapter does work
with Windows XP. Click the Continue Anyway button.
Note: Do not click Cancel at any time during the installation
process. Doing so will prevent your driver from being properly
installed on your PC.
26
Instant EtherFast
Figure 8-2
Figure 8-3
® Series Compact USB 2.0 10/100 Network Adapter
5. The Completing the Found New Hardware Wizard screen will appear. Click
the Finish button. Then remove the Driver CD from the CD-ROM drive.
Congratulations! The installation of the Compact USB 2.0 10/100
For more information about networking under Windows XP, refer to
Figure 8-4
Network Adapter is complete.
your Microsoft Windows XP documentation.
27