Client For Netware Networks; Ipx/Spx-Compatible Protocol; Netbeui; Tcp/Ip - Linksys USB200M Guia Del Usuario

5. If you've added all the components you require, click the O K button again.
6. The computer will begin copying files to your system. When the
installation is complete, you will be asked if you want to reboot the
computer. Click the Yes button.

Client for NetWare Networks

1. If you plan on connecting to a Novell NetWare server (3.x), click the Add
button.
2. Highlight Client, and click the Add button.
3. Choose Microsoft as the manufacturer.
4. Highlight Client for NetWare Networks, and click the O K button.
5. If you've added all the components you require, click the O K button again.
6. The computer will begin copying files to your system. When the
installation is complete, you will be asked if you want to reboot the
computer. Click the Yes button.

IPX/SPX-compatible Protocol

1. If you need to use the IPX/SPX-compatible protocol, click the Add button.
2. Highlight Protocol, and click the Add button.
3. Choose Microsoft as the manufacturer.
4. Highlight IPX/SPX-compatible Protocol, and click the O K button.
5. If you've added all the components you require, click the O K button again.
6. The computer will begin copying files to your system. When the
installation is complete, you will be asked if you want to reboot the
computer. Click the Yes button.
Note: Linksys does not provide technical support for network
configuration or troubleshooting.
38
Instant EtherFast ® Series Compact USB 2.0 10/100 Network Adapter

NetBEUI

1. If you need to use the NetBEUI protocol, click the Add button.
2. Highlight Protocol, and click the Add button.
3. Choose Microsoft as the manufacturer.
4. Highlight NetBEUI, and click the O K button.
5. If you've added all the components you require, click the O K button again.
6. The computer will begin copying files to your system. When the
installation is complete, you will be asked if you want to reboot the
computer. Click the Yes button.

TCP/IP

1. If you need to use the TCP/IP protocol, click the Add button.
2. Highlight Protocol, and click the Add button.
3. Choose Microsoft as the manufacturer.
4. Highlight TCP/IP, and click the O K button.
5. If you've added all the components you require, click the O K button again.
6. The computer will begin copying files to your system. When the
installation is complete, you will be asked if you want to reboot the
computer. Click the Yes button.
39