Linksys USB200M Guia Del Usuario página 19

• For Windows XP, do the following:
1. Click Start, and right-click My Computer.
2. Select Properties.
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click the + sign next to Network adapters.
6. Highlight Linksys Compact USB 2.0 10/100 Network Adapter,
and right-click it.
7. Select Properties.
8. Click the Advanced tab.
9. Select Connection Type. Select the appropriate value for your
network device. In most cases, AutoSense should be selected.
10.Select Flow Control. Select the appropriate value for your
network device. In most cases, Enable should be selected.
11.Select Remote Wakeup (Wake-on-LAN). Select the appropriate
value for your network device. In most cases, Link up or Magic
Packet should be selected.
12.Click the O K button.
12.If you are having difficulty installing the Adapter, you may need to remove the
Adapter and re-install it from scratch.
• For Windows 98, go to "Appendix C: Starting Over in Windows 98."
• For Windows Millennium, do the following:
1. Right-click the My Computer icon, and select Properties.
2. Click the Device Manager tab.
3. Click the + sign next to Network adapters.
4. Highlight Linksys Compact USB 2.0 10/100 Network Adapter,
and right-click it.
5. Select Remove.
6. When you see the Confirm Device Removal screen, click O K.
7. When you are asked if you want to restart your computer, click
Yes.
8. Go to "Chapter 6: Windows Millennium Installation and Setup"
for installation instructions.
• For Windows 2000, do the following:
1. Right-click the My Computer icon, and select Properties.
2. Click the Hardware tab.
3. Click the Device Manager button.
4. Click the + sign next to Network adapters.
32
Instant EtherFast ® Series Compact USB 2.0 10/100 Network Adapter
5. Highlight Linksys Compact USB 2.0 10/100 Network Adapter,
and right-click it.
6. Select Uninstall.
7. When you see the Confirm Device Removal screen, click O K.
8. Go to "Chapter 7: Windows 2000 Installation" for installation
instructions.
• For Windows XP, do the following:
1. Click Start, and right-click the My Computer icon.
2. Select Properties.
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click the + sign next to Network adapters.
6. Highlight Linksys Compact USB 2.0 10/100 Network Adapter,
and right-click it.
7. Select Uninstall.
8. When you see the Confirm Device Removal screen, click O K.
9. Go to "Chapter 8: Windows XP Installation" for installation
instructions.
33