Windows 98 Network Configuration - Linksys USB200M Guia Del Usuario

6. Windows will begin copying the driver files to your computer. If Windows
asks you for the original Windows CD-ROM, insert the CD-ROM, and
direct Windows to the proper location for the CD-ROM (e.g., D:\). If you
have the Windows 98 setup files already installed in a directory, click O K,
and enter C:\windows\options\cabs (if "C" is the letter of your hard drive)
in the windows that appears. When Windows has completed copying the
files, click the Finish button.
Figure 5-4
7. When asked if you want to restart your computer, remove the Driver CD
from the CD-ROM drive, and click the Yes button. If Windows does not ask
you to restart your PC, click Start. Choose Shut Down, and select Restart.
Then click the OK button.
Congratulations! The installation of the Compact USB 2.0 10/100
Network Adapter is complete.
To enable file and printer sharing, go to the next section,

"Windows 98 Network Configuration."

8
Instant EtherFast ® Series Compact USB 2.0 10/100 Network Adapter
Windows 98 Network Configuration
If you are installing the Adapter in a Windows 98 PC that is used in an NT
domain, go to "Appendix B: Client for Microsoft Setup for Windows 98."
1. From the Windows 98 desktop, right-click the Network Neighborhood
icon. Then click Properties.
2. The Network screen will appear. Click the Configuration tab. A screen
similar to Figure 5-5 will appear.
3. Click the File and Print Sharing button. The File and Print Sharing
screen will appear.
Note: Linksys does not provide technical support or troubleshooting
for network configuration.
Figure 5-5
9