Product Operation; Care Recommendations - Sub-Zero Designer Serie Guía De Uso Y Mantenimiento

Product Operation

Sabbath
This appliance is certified by Star-K to meet strict religious
regulations in conjunction with specific instructions found
on www.star-k.org.
Sabbath mode automatically turns on the interior lights at
a reduced brightness. The lights stay on when the door is
closed. The lights cannot be turned off in Sabbath mode.
Sabbath mode automatically turns off after 74 hours. All
lighting preferences return to the previous setting when
Sabbath mode is turned off.
To turn on Sabbath:
1 Touch .
2 Touch and hold for 3 seconds
To turn off Sabbath:
1 Touch and hold for up to 10 seconds.
8 | English

Care Recommendations

Cleaning
STAINLESS STEEL EXTERIOR
Use a nonabrasive stainless steel cleaner and apply with a
soft lint-free cloth. To bring out the natural luster, lightly
wipe the surface with a water-dampened microfiber cloth
followed by a dry polishing chamois. Always follow the
grain of stainless steel.
INTERIOR CLEANING
To clean interior surfaces and all removable parts, wash
with a mild solution of soap, water and baking soda. Rinse
and dry thoroughly. Avoid getting water on the lights, con-
trol panel, and cherrywood facing on wine racks.
Use a standard glass cleaner to clean the UV-resistant glass
door.
CAUTION
Do not use vinegar, rubbing alcohol, or other
alcohol-based cleaners on any interior surface.
CONDENSER CLEANING
CAUTION
Before cleaning the condenser, turn power off at the
control panel. Wear gloves to avoid injury from sharp
condenser fins.
The condenser is located behind the kickplate. Clean the
condenser every 6–12 months.
To clean the condenser:
Turn power off at the control panel.
1
2 Remove the kickplate by extracting the two mounting
screws. Refer to the illustration below.
3 Use a soft bristle brush and vacuum to remove dust and
lint from the condenser.
CAUTION
Failure to clean the condenser could result in tem-
perature loss, mechanical failure, or damage.
CONDENSER
SCREW
Condenser location