Troubleshooting
Problem
Possible Cause and Solution
Unit fails to power
Unit is not plugged in. Plug power cord into electrical outlet.
on.
Household circuit breaker / ground fault interrupter has tripped or blown a fuse. Reset circuit breaker / ground fault
interrupter, or replace fuse. For assistance, contact a licensed electrician.
Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
Unit makes a bub-
This is normal. Water is being dispensed into Base.
bling or gurgling
sound.
Water level in Tank is empty or too low. Refill with clean, cool tap water. (See HOW TO USE for instructions.)
Unit is not producing
desired amount of
Unit has reached its set point. When set humidity level is reached, the Fan will turn off until humidity level in the
humidity.
room drops below humidity set point.
Airflow is blocked. Remove obstruction.
Unit settings are too low. Set to High Fan Speed and Continuous Humidity for maximum humidity output.
Filters are in need
of replacement too
The additional sodium in chemically softened water may cause Filters to harden or become mushy. Try using
often.
untreated tap water or distilled water.
Try adding Bacteriostat or Water Treatment found at most hardware or home specialty stores to the water. Or
periodically remove the Filters and clean, by soaking them in cool tap water and two teaspoons of white vinegar. Let
stand 20 minutes, then rinse in cool water. Allow excess water to run off and dry before replacing them in the Base.
DO NOT wring.
16 English
All manuals and user guides at all-guides.com
Disposal
IMPORTANT NOTES
Dispose of all packaging materials in an environmentally respon-
sible manner.
Waste Electrical and Electronic Equipment Disposal: This
marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where
the product was purchased. They can take this product for envi-
ronmental safe recycling.
PACKAGE RECYCLING: The packaging protects the appli-
ance from transport damage. The packaging materials are
selected from the point of view of their environmental friend-
liness and disposal technology and are therefor recyclable.
WEEE Recycling
Additional Product Information
Model(s):
Evap3-EU
Description
Unit
Value
Input Voltage
V
220 - 240
Mains Voltage Frequency
Hz
50
Protection Class
Class
II /
Dimensions
W x H x D
38.4 x 26.0
(cm)
x 30.7
Weight
Approx. (g)
3,290
Power Input
W
36
IEC 60879: 1986 corr(1992)
Measurement Standard For
Service Value
GB/T 13380-2007
Contact Details For Obtaining
Vornado Air LLC
More Information
415 East 13th Street
Andover, KS 67002 USA
English
17