Timer And Clock Setting - TESY HPWH 2.1 260 U02 S Instrucciones De Uso Y Mantenimiento

7.1.3. buttons
-
These are the multi-purpose buttons. They are used for the temp setting, parameter setting, parameter checking,
clock adjustment and adjustment of the timer.
- During running status, press
- Press these buttons when the unit is on clock setting status, the hour(s) and the minute(s) of the clock time can be
adjusted.
Press these buttons when the unit is on timer setting status, the hour(s) and the minute(s) of the timer 'ON'/'OFF'
-
can be adjusted.
-
Press and
- Press and
7.1.4. button
Clock setting:
- After power on, short press
simultaneously;
- Short press button to switch hour/minute setting, press the
- Press button again to confirm the settings/changes and exit.
Timer setting:
- After power on, long press
icon "88:" flash simultaneously;
- Press the and
button to transfer to minute setting, minute icon ":88" flash, press the
- Press
minute(s).
- Press button again to transfer to timer off setting, the timer off icon
- Press the and
button to transfer to minute setting, minute icon ":88" flash, press the
- Press
minute(s).
- Press button again to save and exit the timer setting interface.
button to cancel the timer, while the "timer setting" mode is active!!!
Press
NOTE:
The timer 'ON' and timer 'OFF' functions can be set at the same time.
1)
2) The timer settings are automatically repeating.
3) The timer settings are still valid after a sudden power cut.
7.1.5. button
1) When the heat pump is ON, press this button to turn 'ON' the electrical heater. The heater icon
and the electrical heater will start to work according to the control program after "delay" time elapsed (parameter 3 –
default 30 min).
2) When the heat pump is ON, press this button and hold for 5 seconds to enable or disable the fan ventilation function.
3) When the heat pump is OFF, press this button to entry E-heater heating mode.
7.1.6. button
1) Check the temperatures and EXV open steps
And
or button to adjust the setting temperature directly.
buttons at the same time and hold for 5 seconds, the buttons are locked.
buttons at the same time and hold for 5 seconds again, the buttons are unlocked.

- TIMER AND CLOCK SETTING

button to enter the clock setting interface, hour and minute icons "88:88" flash
button for 5 seconds to enter the timer setting interface, the timer on icon
buttons to set the exact hour(s).
buttons to change the hour(s).
and buttons to set the exact hour(s) and minute(s);
and hour icon "88:" flash simultaneously.
18
and buttons to set the exact
and buttons to change the
will be shown,
and hour