Design Characteristics - TESY HPWH 2.1 260 U02 S Instrucciones De Uso Y Mantenimiento

3.

DESIGN CHARACTERISTICS

Pos.
1 Heat pump.
2 Control panel.
3 External PVC jacket.
4 Enameled storage tank
Upper storage tank probe. "T3"
5
Lower storage tank probe. "T2"
6
7 Refrigerant recharge needles.
8 Ambient air recirculation fan.
9 Electronically regulated expansion
valve.
10 High-efficiency finned evaporator.
11
Air inlet (∅ 160 mm).
12
Air outlet (∅ 160 mm).
13 Hermetically-sealed rotary compressor.
Compressor's accumulator
14
(1.5 kW – 230 W) El. heater
15
16 Condenser outlet line - liquid
Condenser inlet line – hot gas
17
18 Replaceable magnesium anode.
Hot water outlet connection (G 1").
19
Recirculation fitting (G ¾").
20
Evaporator's distributor
21
Condensates drain (G 3/4").
22
Solar coil (G 1")
23
Cold water inlet connection (G1").
24
25 50 mm polyurethane insulation.
High pressure switch – automatic reset.
26
27 Safety thermostat, manual reset.
28 Controller box.
29 Probe for solar coil thermosensor.
Low pressure switch – automatic reset.
30
31 4-way defrosting valve
32 Upper decorative panel
33 Back decorative panel
34 Front decorative panel
35 Lower decorative panel (condense trap)
36 Condenser.
37 Protective fan grid
Return gas temperature "T5"
38
Coil temperature "T4"
39
40 Bolts M6x60
Ambient temperature "T1"
41
Fig. 3a
Fig. 3b
Fig. 3c
8