Intended Use; Safety Informations - BGS technic 70009 Manual De Instrucciones

TOOLS
1 Counter-Holding Tool for Crankshaft Pulley, to be used as OEM 999 5433
2 Crankshaft Locking Pin, to be used as OEM 999 7005
3 Camshaft Locking Pin, to be used as OEM 999 7007
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

INTENDED USE

This tool set is used for checking and adjusting the engine timing and it is suitable for
5 Cylinder Volvo Engines 2.0 / 2.4 / 2.5 Diesel with e.g. following engine codes:
Engine
2.0 Diesel
2.0 Diesel
2.5 Diesel
2.5 Diesel
2.5 Diesel
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com

SAFETY INFORMATIONS

•
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working on running engines. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Be careful when working on hot engines because of the risk of burn injuries!.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine Timing Tool Set
for Volvo 5 Cylinder Diesel
Engine Code Engine Code
D 5204 T D 5204 T2
D 5204 T6 D 5204 T7
D 5244 T D 5244 T2
D 5244 T8 D 5244 T9
D 5244 T14 D 5244 T15
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Engine Code Engine Code
D 5204 T3 D 5204 T4
D 5244 T4 D 5244 T5
D 5244 T10 D 5244 T11
D 5244 T16 D 5244 T17
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 70009
Engine Code
D 5204 T5
D 5244 T7
D 5244 T13
D 5244 T18