Installation; Operating Instructions; Maintenance - Klarstein GRILLEXPRESS 3600 Manual

INSTALLATION

1 Before installation, should first check whether the power, voltage and a
nameplate marking voltage is consistent, whether the user side power switch
and fuse conforms to the machine power requirements.
2 The machine shell must be reliable grounding, grounding wire will be
strictly prohibited in tap water or gas pipeline. Stove are placed around the
flammable and explosive articles, and keep working environment with good
ventilation.
3 Please be careful, not to place the machine on the reach of children. If you use
the product in child place, be careful and take good care of children.

OPERATING INSTRUCTIONS

1 Be sure power cord is properly connected to a proper source (220~240V/
50Hz).
2 Power indicator should indicate power available (light on).
3 Set to desired temperature (heating indicator will light on). Warm-up time is
approximately 7-8 minutes. Heating indicator will cycle at set temperature.
4 When set temperature is reached, lift top grill, using black handle, and lightly
grease grill plates with vegetable oil. Place food on grill and lightly press
handle down. Excess oil will collect in the grease collection tray. Remove food
when cooked. The heating elements will automatically cycle as needed.
5 Turn off the machine when no longer needed and unplug from power source.

MAINTENANCE

• All maintenance work must be carried out after cutting off power.
• The machine after use should use soft cloth for cleaning, if necessary,
select the non corrosive cleaning agent. Do not use water to flush directly
or spraying machine, in order to avoid electrical appliances due to seepage
failure caused moisture.
• The lower part of the body and connected with the residual oil and residue oil
box collection, often should clean out, keep clean.
• When not use in a long time, should keep the machine clean, and save in the
ventilated, non corrosive gas environment.
EN
13