Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
M A I N T E N A N C E
adjust the temperature to your individual
requirements, turn the temperature con-
trol dial to the right (clockwise) to increase
the desired temperature and to the left
(counter clockwise) to lower the
temperature.
REMOTE CONTROL BATTERY
REPLACEMENT
Replace with 2 AAA batteries.
WARNING: Do not mix old and new batteries
Do not mix alkaline, standard (Carbon-Zinc),
or rechargeable (Nickel Cadmium) batteries.
MAINTENANCE
WARNING:
Disconnect power and unplug the power
cord before attempting any maintenance or
cleaning to reduce the risk of fire, electric
shock or damage to persons. The bulbs in
your unit can become extremely hot. Allow
at least 10 minutes between turning off the
unit and removing the light bulbs to avoid
the accidental burning of the skin.
RISK OF FIRE:
Do not exceed the
recommended bulb wattage.
REPLACING THE
FLAME EFFECT LIGHT AND
LOG-SET LIGHT BULBS
Step 1:
Remove 3 screws on the back of
fireplace and open the rear cover.
Step 2:
You will find 2 X 60W Type B-10
bulbs under log-set bed.
Step 3:
Loosen and remove the burnt out
bulb(s) and replace with new bulb(s).
Step 4:
Close the rear cover and secure
with the 3 screws.
Step 5:
Plug in the unit.
9
Publicidad
Tabla de contenido
