General Use - Bell & Ross BR V2-92 ORANGE Manual De Instrucciones

ENGLISH
BR V2-92 ORANGE
LTD 500 PCS
BR-CAL.302
Movement : mechanical with automatic winding. Calibre BR-CAL.302. Power reserve approximately 40 hours.
quickset. Time-setting with hacking function.

GENERAL USE

Starting the watch
When the watch has stopped (crown in position 0): unscrew the crown (turn
anticlockwise) to position 1. Wind the movement by turning the crown clock-
wise. After approximately 40 rotations, the watch is fully wound (the winding
mechanism does not have a stop to prevent overwinding). The power reserve
is approximately 40 hours when fully wound. When the watch is worn , the
automatic mechanism will wind the movement.
to ensure perfect water resistance, screw the crown back into position 0.
Never operate the crown underwater.
Setting the time
Unscrew the crown then pull it out to position 3. The seconds hand will stop,
enabling the time to be set to the nearest second. Set the time by rotating
the crown in the required direction.
IMPORTANT
Magnetic fields. Magnetic fields can adversely affect the accuracy of your
watch. Also, we would recommend that you avoid placing your watch near
electronic devices that may generate large magnetic fields (radio, smart-
phone, television, computer, tablet, loudspeakers, etc.).
MAINTENANCE
After being immersed in seawater, it is recommended to carefully rinse off
the watch and strap with fresh water. It is also recommended to have the
water resistance of your watch checked every two years. To ensure a service
that meets the brand's exacting standards, any servicing of your watch must
be carried out by the Bell & Ross service centre or a watchmaker approved
by Bell & Ross. Whenever repairs are made during the warranty period, you
must present the Bell & Ross warranty card, duly dated and signed by the
retailer at the time the watch was purchased.
Case : 41 mm in width.
: Once the watch is set,
NOTE
Minute hand
Hour hand
Seconds hand
Functions
Setting the date
Quick setting
Crown in position 2: unscrew and pull the crown out to position 2 and set
the date by turning the crown anticlockwise.
watches with a date function, quickset date setting MUST NOT UNDER ANY
CIRCUMSTANCES be carried out between the times of 9 PM (21.00) and 3 AM
(3.00).
Slow setting
Crown in position 3: to ensure the date changes at midnight rather than
noon, it is recommended to set the date by adjusting the hands of the watch.
Unscrew and pull the crown out to position 3 and turn the hands until the
date changes. Then set the precise time.
0 1 2
INTERNATIONAL WARRANTY
To benefit from your 2-year international warranty, your card must be acti-
vated at the time of purchase by your approved Bell & Ross point of sale, and
presented every time an operation is performed. You can now access the
digital version of this card and all the information relating to your watch by
scanning the QR code or visiting:
To ensure a service that meets the brand's exacting standards, any servic-
ing of your watch must be carried out by the Bell & Ross service centre or
a watchmaker approved by Bell & Ross. The warranty does not, however,
include:
. Any damage caused by accidents or by inappropriate or improper use of the
watch (e.g. violent impacts, crushing, rough handling of the clasp).
. Any damage caused by repair or disassembly operations carried out by a
retailer or after-sales service centre not approved by Bell & Ross.
. The consequences of the watch and bracelet/strap ageing and normal wear
and tear.
3
: hours, minutes and seconds. Date with
: as with all mechanical
NOTE
Rotating bezel
3
Crown
Date
www.bellross.com/warranty.