Setting The Alarm Time; Calling Up The Alarm Times - Auriol 291528 Instrucciones De Utilización Y De Seguridad

Press the CLOCK button
zone 2 symbol
time appear in the LC display.
Press the CLOCK button again to return to
the default display.

Setting the alarm time

You can set two different alarm times.
1. Press and hold down the ALARM button
for about 3 seconds.
20
Note: If an alarm time has been set be-
fore, then that previously set alarm time
appears in the LC display. If not, then the
display shows 0:00 or AM 12:00.
2. The hour display flashes. Press the SET /
RESET button
3. Press the ALARM button to confirm your
settings. The minute display flashes.
4. Press the SET / RESET button to set the
desired value.
5. Press the ALARM button to confirm your
settings.
6. Repeat steps 2 to 5 to set the time for
Alarm 2.

Calling up the alarm times

Press ALARM button
call up the set time for Alarm 1 or Alarm
2 respectively.
Press the ALARM button again to return
to the default display.
19
and the according
18
to set the desired value.
24
once or twice to
20
. The time
GB/IE 41