Descargar Imprimir esta página

Switchng On The Power; Selecting Signals - NEC WT600 Guia De Instalacion

Ocultar thumbs Ver también para WT600:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 66
4. Switching on the Power
1. Turn on the main power switch.
To turn on the main power to the projector,
press the Main Power switch to the ON position
( I ).
NOTE: Before you turn on your projector,
ensure that the computer is turned on.
The POWER indicator will light orange (In the
Idle mode the STATUS indicator will light green
as well). The projector is in the Idle or Standby
mode.
2. Turn on the projector.
To turn on the power to the projector, press and hold
the ON/STAND BY button on the projector cabinet or
the POWER ON button on the remote control for a
minimum of 2 seconds.
NOTE : To turn off the projector, press and hold the
ON/STAND BY button or the POWER OFF button for
a minimum of 2 seconds.
Note on Startup screen (Menu Language Select
screen)
When you first turn on the projector, you will get the
Startup screen. This screen gives you the opportu-
nity to select one of the seven menu languages:
English, German, French, Italian, Spanish, Swedish
and Japanese. (See page 3-1 of the user's manual)

5. Selecting Signals

Press and hold the SOURCE button for a
minimum of 1 second, the projector will search
for the next available input source. When using
the remote control, press the RGB button for the
RGB source.
NOTE:
• When projecting the image from a personal
computer and the image edge is cut off or the
projection is poor, press the AUTO ADJUST
button (which is labeled AUTO ADJ. on the
remote control) and the projector will perform
the adjustment automatically.
• When the image from the personal computer
is not projected, see "Common Problems &
Solutions" on page E-14.
E-6
Projector's left side
Cabinet controls
ENTER
CANCEL
3D
REFORM
AUTO
ADJUST
POWER
ON/
STATUS
STAND BY
LAMP
Cabinet controls
PC CARD
FOCUS
SOURCE
MENU
SELECT
Cabinet controls
ENTER
CANCEL
3D
REFORM
AUTO
ADJUST
POWER
ON/
STATUS
STAND BY
LAMP
Remote control
OFF
ON
POWER
VIDEO
RGB
VIEWER
AUTO ADJ.
LASER
SELECT
Remote control
OFF
ON
POWER
VIDEO
RGB
VIEWER
AUTO ADJ.
LASER
SELECT

Publicidad

loading