Setting The Sleep Timer - Yamaha CRX-E320 Manual De Instrucciones

SETTING THE SLEEP TIMER

If you set the sleep timer, this unit automatically turns to the standby mode after the specified interval.
To set the sleep timer using the remote
control
STANDBY/ON OPEN/CLOSE
1 2 3
5 6 7
INDEX
9 0
FREQ/TEXT
PROG
REPEAT
PTY SEEK
MODE
RANDOM
TIME/INFO DISPLAY
FOLDER
Press SLEEP repeatedly to set the interval
for the sleep timer.
Each time you press SLEEP, the front panel display
changes as follows:
SLEEP 30
SLEEP 60
SLEEP 120
Normal display
(sleep off)
y
The SLEEP display automatically turns off 3 seconds after
the sleep timer is set. "SLEEP" lights up in the front panel
display.
To cancel the sleep timer function using
the remote control
Press SLEEP repeatedly until the SLEEP indicator
disappears and the normal display appears.
Notes
• The sleep timer works only for this unit. It does not turn off
other component connected to this unit.
• The sleep timer is canceled if you turn this unit to the standby
mode.
30
En
Setting the sleep timer
4
8
DIMMER
A B
START
SLEEP
SLEEP
To set the sleep timer on the front panel
display
STANDBY/ON
USB PORTABLE PHONES SOUND
MULTI JOG
1
Press TIMER repeatedly until "SLEEP XX(X)"
appears in the front panel display, and push
MULTI JOG immediately.
2
Rotate MULTI JOG to set the interval (5 to 240
mins), and push MULTI JOG to confirm.
You can set the interval in 5-minute steps (5 to 60
mins), 10-minute steps (60 to 120 mins), or 30-
minute steps (120 to 240 mins).
To cancel the sleep timer function on the
front panel display
1
Press TIMER repeatedly until "SLEEP XX(X)"
appears in the front panel display, and push
MULTI JOG immediately.
2
Rotate MULTI JOG until "SLEEP OFF"
appears in the front panel display, and push
MULTI JOG to confirm.
INPUT
MULTI JOG
VOLUME
MODE TIMER
PUSH-ENTER
TIMER