6.
GENERAL SPECIFICATIONS
Adjustment
This multimeter incorporates a non-volatile memory containing the adjustment characte-
ristics for all measurement ranges. This enables the instrument to be re-adjusted via a
serial link without opening the instrument. It is supplied with a certificate of verification.
Safety
Environment
Indoor use
Altitude < 2000 m
Reference temperature
Rated range of use
Limit range of operation
Storage temperature range
Temperature coefficient
Relative humidity
Casing and circuit
Operating quality
Electromagnetic compatibility
Power supply
from 110 V - 10 % to 230 V + 10 %, 50 Hz or 60 Hz
Mechanical
Dimensions
Weight
Display
Liquid crystal display comprising:
- a 50 000-points display + sign (digits 20 mm high),
- a 34-bar analogue bargraph display,
- appropriate units for each type of measurement,
- triggered mode indicators (relative, ranging)
Measurement rate
Digital display
Bargraph
28
According to IEC 1010-1
18°C to 28°C
0°C to 50°C
-10°C to 60°C
-40°C to 70°C
max 0.1 x accuracy /°K
0 to 80 % from 0 to 40°C (70 % max for 5 MΩ/50 MΩ)
0 to 70 % from 40°C to 50°C
60 % above 50°C
self-extinguishing materials
IEC 359
NF EN 61326-1
Max. influence in electromagnetic fields :
3 % end of scale in V
5 % end of scale in Ω and capacitance ranges
295 x 270 x 95 mm
1,6 kg
2 measurements/s
20 measurements/s
and A
ranges
DC
DC
Benchtop multimeter
Chapter II