3�3 Scope Of Delivery; 3�4 Delivery Versions - Renfert POWER steamer 1 Manual De Instrucciones

Ocultar thumbs Ver también para POWER steamer 1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 92
3.3
Scope of delivery
1 Steam cleaning unit
1 Tank cap
1 Quick Start Guide
1 Service cap tool
1 Cleaning brush
1 Sealing set
1 Water hose (POWER steamer 2 only)
Test strips for determining the water hardness and rinsing intervals (see Chap� 4�5)
3.4
Delivery versions
1845 X000 POWER steamer 1
1846 X000 POWER steamer 2
3.5
Accessories
1845 0200 POWER steamer wall bracket
1845 0100 POWER steamer descaler
1846 0100 POWER steamer water softener
4
Startup
4.1
Unpacking
⇒ Remove the equipment and accessories from the package�
Do not lift the unit using parts that extend outwards, such as the handpiece holder, for example.
⇒ Check the delivery for completeness (compare with the scope of delivery)�
⇒ Remove the shipping restraint�
⇒ Screw in the tank cap (1, Fig� 1)�
4.2
Setup
⇒ Place the unit on a stable, level work table�
⇒ Do not cover the ventilation slots on the back of the unit�
⇒ To the rear, ensure that there is at least 5 cm of space to the wall�
⇒ Place the unit so that the power plug can be accessed easily�
⇒ For safe storage, hang the tool for the service cap on the hook provided on the back of the housing�
Place the unit so that there is no risk if steam is discharged from the outlet opening of the over-
pressure valve (14, Fig. 1). For example, do not place the unit in front of an electrical socket.
The outlet opening of the overpressure valve (14, Fig. 1) must not be closed or blocked in any
way.
When operating the unit on a base (e.g., a sink), its edge may not be higher than 20 mm
(approx. 3/4") to prevent water entering the unit if water collects.
- 7 -
en

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Power steamer 2

Tabla de contenido