Festool ETS 150/3 EQ Manual De Instrucciones Original página 11

ETS 150/3 E gives the best surface quality and
low abrasion. The ETS 150/5 EQ, ETS 150/5 E
provides high abrasion with good surface qual-
ity. The sanding performance and quality depend
mainly on the choice of the right sanding material.
Festool offers the appropriate sanding material
for all applications (seeFestool catalogue or on
the Internet under "www.festool.com").
We recommend the following settings on the
rotary control (1.1) for electronic machines:
rotary control setting
- sanding work
5 - 6
- sanding with max. drive
- sanding old paint
- sanding wood and veneer prior to painting
- interim sanding of paint on surfaces
4 - 5
- sanding of thinly applied primer
- sanding of wood with sanding vlies
- sanding edges on wooden parts
- smoothing primed wooden surfaces.
3 - 4
- sanding full wooden and veneer edges
- sanding in the grooves/rebates of windows and
doors
- interim paint sanding on edges
- pre-sanding natural wood windows with sanding
vlies
- smoothing wood surfaces with sanding felt prior
to staining
- rubbing down stained surfaces with sanding
vlies
- rubbing down or removing excess lime paste
with sanding vlies
2 - 3
- interim paint sanding on stained surfaces
- cleaning natural wood window grooves with
sanding felt
1 - 2
- sanding stained edges
- sanding thermoplastic synthetics
10 Sanding base brakes
The sanding base is braked by a collar (2.2) in
order to prevent any uncontrolled excessive speed
of the sanding base. Because the collar wears
down in the course of time, it has to be replaced
by a new one (order no. 453 388) as soon as there
is any reduction in the braking effect.
11 Maintenance and care
WARNING
Risk of accident, electric shock
Always pull the plug out of the socket before
•
performing any type of work on the machine.
All maintenance and repair work which re-
•
quires the motor housing to be opened must
only be carried out by an authorised service
workshop.
Check the plug and the cable regularly and
•
should either become damaged, have them
replaced by an authorised after-sales service
workshop.
The cooling air vents on the motor housing must
always be free of blockages and clean to ensure
air circulation.
Customer service and repair only
through manufacturer or service
workshops: Please fi nd the nearest
address at: www.festool.com/Service
EKAT
Use only original Festool spare parts!
4
Order No. at: www.festool.com/
Service
5
3
2
1
12 Disposal
Do not throw the power tool in your household
waste! Dispose of machines, accessories and
packaging at an environmentally-responsible
recycling centre. Observe the valid national regu-
lations.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
Information on REACh: www.festool.com/reach
13 Accessories
The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet under "www.festool.com".
11