Bresser Spotty 20-60x60 Instrucciones De Uso página 8

Please take a moment to look at the
photo below and get to know the cor-
rect terms. This will help you to better
understand the instruction manual.
counter clockwise
clockwise
Parts Overview
1. Eyepiece / Rubber eyecups
2. Zoom
3. Focus wheel, focus ring
4. Optical tube
5. Tripod adapter thread
6. Main tube clamp
7. Fastening screw
8. Sunshield
8
9. Tripod head with thread screw
10. Fixing screw for tripod head
11. Tripod legs
12. Axes for vertical and horinzontal
movement
13. Panhandle with locking function
14. Attached Dust cap
15. Soft Carry Case with carrying strap
Fastening the scope on the tripod
Take the scope out of the packaging
and pull out the tripod legs (11) as far
as they con go. Place the tripod on an
even and stable base (like a table).
Your scope has a normed tripod adap-
tor thread (5), which can be screwed
precisely on the tripod adaptor thread
screw (9) of the tripod.
Please tighten the fixing screw (10)
beneath the tripod head.
Moving the scope together with the
tripod
Unlock the vertical (up and down) and
horizontal (left and right) axes (12) by
turning the
panhandle (13) counter clockwise.
Now you can move the tripod head
with the fastened scope on both axes
(up/down and left/right).
When you have reached the desired
observing position, the scope can be
locked by turning the panhandle (13)
the other way as before (clockwise).
Controls
• Focus Wheel:
Look into the eyepiece (1) and rotate
the focus wheel (3) in either direction
to focus on an object. Keep turning
the wheel until you can clearly see an
image.
• Zoom:
Rotate the zoom control (2) to zoom in
or out on an object; then use the focus
knob (3) to refocus.