Installing The Appliance; Important; Connecting The Appliance - DeLonghi ELETTA CAPPUCCINO EVO ECAM4686X Manual De Instrucciones

3.2 Installing the appliance

Important!

When you install the appliance, you should respect the follow-
ing safety warnings:
• The machine gives off heat. After positioning the machine
on the worktop, leave a space of at least 1.18 in / 3 cm be-
tween the surfaces of the machine and the side and rear
walls and at least 5.6 in / 15 cm above the coffee maker.
• Water penetrating the machine could cause damage.
Do not place the appliance near taps or sinks.
• The appliance could be damaged if the water it contains
freezes.
Do not install the appliance in a room where the tempera-
ture could drop below freezing point.
• Arrange the cord (A8) in such a way that it cannot be dam-
aged by sharp edges or come with contact with hot surfac-
es (e.g. electric hot plates).

3.3 Connecting the appliance

Important!
Check that the mains power supply voltage corresponds to that
indicated on the rating plate on the bottom of the appliance.
Connect the appliance to an efficiently earthed and correctly
installed socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified
professional.
Please note:
• The first time you use the appliance, rinse with hot water
all removable accessories which may come into contact
with water or milk.
• The first time you use the machine, the water circuit is
empty and the appliance could be very noisy.The noise
becomes less as the circuit fills.
• Coffee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of coffee
in the grinder. The machine is, however, guaranteed to be
new.
1. Connect the appliance to a mains socket (fig. 1);
1
2. "Language": press the scrolling arrows
(B10) until the required language is displayed, then
press
Follow the instructions indicated on the appliance display (B1):
3. Remove the water tank (A14) (fig. 2), fill to the MAX line
(marked on the tank) with fresh water (fig. 3), then put the
tank back in the appliance (fig. 4);
4. Check that the hot water spout (C6) is inserted on the con-
nection nozzle (A10) (fig. 5) and place a container holding
a minimum of 3.38 floz/100 ml underneath (fig. 6);
5. Press
from the water spout then goes off automatically.
The coffee machine is now ready for normal use.
Please note:
• The first time you use the appliance, you need to make 4
- 5 cappuccinos before it starts to give satisfactory results.
• To enjoy your coffee even more and improve the perfor-
mance of your appliance, we recommend installing a water
softener filter (C4) as described in section "14. Water sof-
tener filter". If your model is not provided with a filter, you
can request one from De'Longhi Customer Services.
2
7
(B11) to confirm.
3
5
(B11)to confirm. The appliance delivers water
(B3) or
4
6