Parts Name - Sanyo PLC-XF60A Guía De Referencia Rápida

Parts Name

Front
q w e r t
Back
y u y i o
!0
Bottom
!1
!1
All manuals and user guides at all-guides.com
q Remote Receiver
w Projection Lens (Option)
e Front Cover (inside Terminals)
r Carrying Handle
t Air Exhaust Vent
CAUTION
Hot air is exhausted from the exhaust vent.
Do not put heat-sensitive objects near this
side.
CAUTION
This projector is equipped with cooling fans
for protection from overheating. To ensure
proper ventilation and avoid a possible risk of
fire and malfunction, pay attention to the
followings:
● Do not cover the vent slots.
● Keep the sides of the projector clear of any
objects. Obstructions may block the
cooling.
y Indicators
u Top Controls
i Air Intake Vent
o Air Filter (inside)
!0 Lamp Cover
!1 Adjustable Feet
English
Indicators
q w e
q LAMP 1 REPLACE indicator
Turns orange when the life of the projection Lamp 1
draws to an end.
w WARNING TEMP indicator
Blinks red when the internal temperature of the
projector is abnormally high.
e WARNING FILTER indicator
Lights orange when the projector's filter is
clogged with dust.
r LAMP indicator
- Lights red when the projector is in stand-by
mode.
- Turns a dim lighting when the projector is turned
on.
r t y u
t READY indicator
- Lights green when the projector is ready to be
turned on and remains green lighting during
operations.
- Blinks green in the Power Management mode or
when the projector is shutdown due to a power
failure.
y SHUTTER indicator
Lights blue when the shutter is closed.
u LAMP 2 REPLACE indicator
Turns orange when the life of the projection Lamp 2
draws to an end.