STEINEL L 830 SC Manual página 34

and receives their echo. Any movement by persons in the sensor switched light's
detection zone is noticed by the sensor as a change in echo.
A microprocessor then issues the switch command "switch light ON". Detection
is possible through doors, panes of glass or thin walls. Analysing the signal,
the sensor distinguishes between moving persons and moving objects, such
as bushes or small animals. This rules out any inadvertent triggering by small
animals as well as interference from extreme temperatures.
The functions of the sensor-switched light can be set via smartphone and tablet
or control dial. Bluetooth interconnection is only possible via smartphone or tablet.
Note: The high-frequency output of the iHF-sensor is approx. 1 mW – that's
1000 times less than the transmission power of a mobile phone or the output
of a microwave oven.
Package contents L 830, L 835, L 840 SC/C (Fig� 3�1)
– Luminaire
– Three screws
– Three wall plugs
– Three spacers
Product dimensions L 830 SC/C (Fig� 3�2)
Product dimensions L 835 SC/C (Fig� 3�3)
Product dimensions L 840 SC/C (Fig� 3�4)
Product components L 830, L 835, L 840 SC/C (Fig� 3�5)
A Wall mount
Connecting terminal
B
C Sealing plug
D Plug connection
Light cube
E
Package contents GL 80 SC/C (Fig� 3�6)
– Luminaire
– Profile
– Base plate
– Four floor/ground screws
– Four wall plugs
– Four connecting screws
Product dimensions GL 80 SC/C (Fig� 3�7)
Product components GL 80 SC/C (Fig� 3�8)
Cover cap
A
B Connecting terminal
D Plug connection
E Light cube
F Earth terminal
- 34 -