Scope Of Supply; Safety Instructions; Operator; Work Area Safety - AL-KO 3.22 E easy Traducción Del Manual Original De Instrucciones

GB
No. Component
6 Cutting blade
7 Handle
8 Baffle
9 Fill-level indicator
10 Handle of grass catcher
11 Grass catcher
Height-adjustable and folding handlebar, con-
sisting of:
12 Rotary/snap-in joints with quick-release
lever
13 Lower brace
14 Rotary joint with quick-release lever
15 Upper brace
16* Mains plug*
17* Mains cable*
18* Cable strain relief*
* depending on the model, see technical data.
2.7

Scope of supply

The items listed here are included in the standard
scope of supply. Check that all items are present:
No. Component
1 Lawnmower
2 Grass catcher (unassembled/partially
assembled)*
3 Handlebar (unassembled/partially as-
sembled)*
4 Mulching insert*
* depending on the model, see technical data.

3 SAFETY INSTRUCTIONS

3.1

Operator

■
Young people under 16 years of age and
people who do not know the operating in-
structions are not allowed to use the tool. Ob-
serve any country-specific safety regulations
regarding the minimum age of the user.
■
Inexperienced operating personnel must be
instructed and trained in the operation of the
appliance.
28
■
Do not operate the appliance if you are under
the influence of alcohol, drugs or medication.
3.2

Work area safety

■
Keep work area clean and well lit. Clut-
tered and dark areas invite accidents.
■
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
■
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
3.3

Electrical safety

■
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of elec-
tric shock.
■
Avoid body contact with earthed or
grounded surfaces such as pipes, radia-
tors, ranges and refrigerators. There is an
increased risk of electric shock if your body is
earthed or grounded.
■
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
■
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
■
When operating a power tool outdoors,
use an extension cord suitable for out-
door use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
■
If operating a power tools in a damp loca-
tion is unavoidable, use a residual current
device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
3.4

Power tool use and care

■
Do not force the power tool. Use the cor-
rect power tool for your application. The
correct power tool will do the job better and
safer at the rate for which it was designed.
■
Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
Safety instructions
443223_b