Transportation And Storage; Cautions During Transportation; Repacking Instructions; Transportation And Storage Environment - inbody 270 Manual De Instrucciones

III. Transportation and Storage
A. Cautions during Transportation
When transporting, have two people keep the InBody270 parallel to the ground.
B. Repacking Instructions
Once the InBody270 is installed, avoid transporting the equipment. If it must be transported, repack it in
the following sequence.
1. Turn off the InBody270.
2. Separate the connected adapter, cords, and cables from the equipment, and cover the InBody270 with
the polyethylene foam cover.
3. While holding the upper part lock button, fold down lower the upper part.
4. Put the InBody into the packing box. Place the packing pad over the equipment and tape up the
packing box.
CAUTION NOTE
참 고 주 의
• Always use the protective packing materials provided by InBody when repacking.
C. Transportation and Storage Environment
The InBody270 should be transported or stored under the following conditions.
22
Polyethylene
foam cover
Polyethylene foam cover
DANGER
Caution
참 조 주 의
Temperature range
Relative humidity
Atmospheric pressure
Lock
button
-10 ~ 70°C (14 ~ 158°F)
10 ~ 80% RH (No Condensation)
50 ~ 106kPa
Packing pads